Smart Ideas: Revisited

Posted by

Quick Tips to Finding Hidden Piping and Valves

Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Below are some of the ways that you can be able to find out where the various valves are located.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.

Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. Such gas systems usually have the shutoff valve near the water heater or the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. For such valves using a metal detector may come in handy since they are usually metallic in nature. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.